FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) lost power while driving what should I do - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) lost power while driving what should I do

my Toyota Corolla E170 (2013-2019) lost power while driving what should I do

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
548 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loss of power issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling or hesitation
  • •Poor acceleration or sluggish performance
  • •Unusual engine noises (knocking or sputtering)
  • •Decreased fuel economy
  • •Excessive exhaust smoke

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Wrench set
  • •Torque wrench
  • •Screwdriver set

Parts Required

  • •Fuel pump (if faulty)
  • •Fuel filter
  • •Spark plugs
  • •Air filter

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for repairs.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Check Fuel System

  1. Inspect Fuel Pump:

    • Locate the fuel pump relay and fuse; check for faults.
    • Test the fuel pump operation using a fuel pressure gauge.
    • If faulty, replace the fuel pump.

  2. Replace Fuel Filter:

    • Locate the fuel filter; it is typically near the fuel tank or along the fuel line.
    • Use appropriate wrenches to disconnect the fuel lines from the filter.
    • Replace the old filter with a new one, ensuring proper orientation and sealing.
3. Inspect and Replace Spark Plugs

  1. Remove Ignition Coils:

    • Disconnect the electrical connectors from each ignition coil.
    • Remove the bolts securing the coils and pull them out.

  2. Replace Spark Plugs:

    • Using a spark plug socket, remove the old spark plugs.
    • Inspect the old plugs for wear or fouling.
    • Gap the new spark plugs to manufacturer specifications and install them.
4. Check and Repair Air Intake System

  1. Inspect Air Filter:

    • Locate the air filter housing and open it.
    • Remove and inspect the air filter for dirt or blockage.
    • Replace with a new air filter if necessary.

  2. Check for Vacuum Leaks:

    • Inspect all hoses connected to the intake manifold for cracks or disconnections.
    • Replace any damaged hoses.
5. Reassemble and Reconnect
  • Reinstall all components that were removed.
  • Reconnect the battery and ensure all electrical connections are secure.