my Toyota Corolla E170 (2013-2019) is consuming too much oil what to do

Toyota Corolla E170 (2013-2019)

Error Codes

4-8 hours

Time

hard

Difficulty

high

Severity

3 min read

532 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in the 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the engine is cool before starting work.
•Disconnect the battery if working on electrical components.

Symptoms

•Oil warning light illuminated
•Frequent need to add oil between changes
•Blue smoke from the exhaust
•Engine misfires or rough idling
•Decreased fuel efficiency
•Oil spots under the vehicle

Diagnostic Steps

1
Check Engine Oil Level: Use the dipstick to determine the current oil level and assess for any signs of contamination.
2
Inspect for Leaks: Look for oil leaks around the oil pan, valve cover, and seals.
3
Perform a Compression Test: Use a compression gauge to check the engine's compression in each cylinder to identify any internal wear.
4
Conduct a Leak-Down Test: This test helps determine if there are leaks in the piston rings or valves.
5
Examine PCV System: Inspect the Positive Crankcase Ventilation (PCV) valve and hoses for blockages or malfunctions.
6
Scan for Diagnostic Trouble Codes (DTC): Use an OBD-II scanner to check for any engine codes that may point to oil consumption issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Oil catch pan
•Compression gauge
•OBD-II scanner

Parts Required

•Engine oil
•Oil filter
•Gaskets (valve cover, cylinder head)
•Piston rings (if necessary)
•PCV valve (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check Engine Oil Level: Use the dipstick to determine the current oil level and assess for any signs of contamination.
2
Inspect for Leaks: Look for oil leaks around the oil pan, valve cover, and seals.
3
Perform a Compression Test: Use a compression gauge to check the engine's compression in each cylinder to identify any internal wear.
4
Conduct a Leak-Down Test: This test helps determine if there are leaks in the piston rings or valves.
5
Examine PCV System: Inspect the Positive Crankcase Ventilation (PCV) valve and hoses for blockages or malfunctions.
6
Scan for Diagnostic Trouble Codes (DTC): Use an OBD-II scanner to check for any engine codes that may point to oil consumption issues.

Solution

1. Preparation

Tools Required:
- Socket set
- Torque wrench
- Oil catch pan
- Compression gauge
- OBD-II scanner
Safety Warnings: Ensure the engine is cool before starting work. Disconnect the battery if working on electrical components.

2. Address Oil Leaks

Sub-steps:
1. Raise the vehicle using jack stands and secure it.
2. Clean the area around the oil pan and valve cover with a degreaser.
3. Inspect gaskets for wear; replace any damaged gaskets or seals.
4. Tighten any loose fasteners to manufacturer specifications.

3. Replace Worn Components

Sub-steps:
1. If the compression test indicates low readings, remove the cylinder head.
2. Inspect piston rings for wear and replace them if necessary.
3. Replace the cylinder head gasket and ensure proper torque settings are followed.
4. Reassemble all components and refill with the appropriate type and amount of engine oil.

4. Clean or Replace PCV System Parts

Sub-steps:
1. Locate the PCV valve and remove it from its housing.
2. Clean the valve with carburetor cleaner or replace it if it shows signs of failure.
3. Check the hoses for blockages and replace them if necessary.