my Toyota Corolla E170 (2013-2019) interior lights stay on what’s the cause

Toyota Corolla E170 (2013-2019)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

412 words

Problem Statement

Learn how to diagnose and fix the issue of interior lights staying on in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shock or short circuits.

Symptoms

•Interior lights do not turn off after closing doors
•Dome light remains on while driving
•Battery draining quickly
•Possible warning messages on the dashboard
•Malfunctioning door locks or remote entry system

Diagnostic Steps

1
Check the light switch settings to ensure they are in the 'off' position.
2
Inspect each door switch for proper operation by manually pressing and releasing them.
3
Use an OBD-II scanner to check for any stored trouble codes related to the interior lighting system.
4
Visually inspect the wiring harness and connectors for damage or corrosion.
5
Test the battery voltage to ensure it is maintaining a proper charge.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set

Parts Required

•Replacement door switches (if faulty)
•Replacement light switch (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the light switch settings to ensure they are in the 'off' position.
2
Inspect each door switch for proper operation by manually pressing and releasing them.
3
Use an OBD-II scanner to check for any stored trouble codes related to the interior lighting system.
4
Visually inspect the wiring harness and connectors for damage or corrosion.
5
Test the battery voltage to ensure it is maintaining a proper charge.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical shock.

2. Inspect Door Switches

Locate each door switch (typically found on the door frame).
Remove the switch by unclipping it from its mount.
Use a multimeter to test for continuity when the switch is pressed.
- Tools Required: Multimeter
Replace any faulty switches with new ones.

3. Check Light Settings

Ensure the interior light switch is in the correct position (off or door).
If the switch is faulty, replace it.

4. Inspect Wiring

Trace the wiring from the door switches to the interior light assembly.
Look for frayed wires or poor connections.
Repair or replace damaged wiring as necessary.

5. Reconnect Battery and Test

Reconnect the negative battery terminal.
Test the interior lights by opening and closing the doors to ensure they function correctly.