FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) has a sweet smell coming from the engine what could it be - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) has a sweet smell coming from the engine what could it be

my Toyota Corolla E170 (2013-2019) has a sweet smell coming from the engine what could it be

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
507 words

Problem Statement

Learn how to diagnose and fix coolant leaks in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Cooling System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Allow engine to cool before opening the radiator or working on the cooling system.
  • •Disconnect the battery before starting any repairs involving electrical components.

Symptoms

  • •Sweet odor noticeable around the engine bay
  • •Possible engine overheating
  • •Low coolant level in the reservoir
  • •Steam or coolant leaks visible under the hood
  • •Check engine light illuminated (if applicable)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Screwdrivers
  • •Coolant pressure tester
  • •OBD-II scanner

Parts Required

  • •Coolant reservoir (if damaged)
  • •Replacement hoses (if needed)
  • •Radiator (if leaking)

Additional Information

Affected Component
Cooling System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Socket set, screwdrivers, coolant pressure tester, OBD-II scanner
  • Ensure the engine is cool before beginning work.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect and Replace Faulty Components
  • Coolant Reservoir:

    • Remove any clamps and hoses attached to the reservoir.
    • Unbolt the reservoir and inspect it for cracks.
    • Replace with a new reservoir if damaged.
  • Hoses:

    • Check all associated coolant hoses for leaks or wear.
    • Replace any damaged hoses with OEM (Original Equipment Manufacturer) parts, ensuring proper fitment.
3. Radiator Inspection
  • Remove the front grille or any covers to access the radiator.
  • Inspect for leaks, especially at the seams and where hoses connect.
  • If leaks are found, consider replacing the radiator. Drain the coolant before removal, and re-install with new gaskets if necessary.
4. Coolant Replacement
  • Drain the existing coolant from the system.
  • Flush the entire cooling system with a coolant flush solution to remove any debris.
  • Refill with the manufacturer-recommended coolant mixture (typically a 50/50 blend of coolant and distilled water).
5. System Testing
  • Reconnect the battery and start the engine.
  • Allow the engine to reach operating temperature and monitor for leaks.
  • Check the coolant level again after the engine has cooled and top off if necessary.