my Toyota Corolla E170 (2013-2019) has a strong smell of gasoline what's wrong

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

491 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a strong gasoline smell in your 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on fuel systems to avoid sparks.
•Allow the engine to cool completely before starting repairs.

Symptoms

•Strong gasoline odor around the vehicle
•Fuel leakage under the vehicle
•Reduced fuel efficiency
•Possible engine misfire or rough idle
•Illuminated check engine light

Diagnostic Steps

1
Inspect the fuel lines for any visible cracks or leaks.
2
Check the fuel injector seals for proper sealing and signs of leakage.
3
Use an OBD-II scanner to check for any related error codes.
4
Inspect the fuel tank for any signs of damage or corrosion.
5
Check the fuel pressure using a fuel pressure gauge to ensure it is within specifications.
6
Examine the charcoal canister and associated hoses for blockages or cracks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Fuel line removal tool
•Safety goggles
•Gloves
•Torque wrench
•Fuel injector puller
•Fuel pressure gauge
•Pliers

Parts Required

•Fuel lines
•Fuel injector seals
•Charcoal canister

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the fuel lines for any visible cracks or leaks.
2
Check the fuel injector seals for proper sealing and signs of leakage.
3
Use an OBD-II scanner to check for any related error codes.
4
Inspect the fuel tank for any signs of damage or corrosion.
5
Check the fuel pressure using a fuel pressure gauge to ensure it is within specifications.
6
Examine the charcoal canister and associated hoses for blockages or cracks.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is cool.

2. Inspect and Replace Fuel Lines

Tools Required: Socket set, fuel line removal tool, safety goggles, gloves
Sub-steps:
1. Disconnect the negative battery terminal to prevent electrical shorts.
2. Use the fuel line removal tool to disconnect the fuel lines at the connectors.
3. Inspect the fuel lines for cracks or wear; replace if necessary.
4. Reconnect the new fuel lines securely and ensure there are no leaks.

3. Replace Fuel Injector Seals

Tools Required: Torque wrench, socket set, fuel injector puller (if necessary)
Sub-steps:
1. Remove the intake manifold to access the fuel injectors (if applicable).
2. Carefully remove the fuel injectors and inspect the seals.
3. Replace any damaged seals with new ones.
4. Reinstall the fuel injectors and torque to manufacturer specifications.

4. Inspect and Replace Charcoal Canister (if needed)

Tools Required: Socket set, pliers
Sub-steps:
1. Locate the charcoal canister, usually near the fuel tank.
2. Disconnect the hoses and electrical connectors.
3. Remove the canister and inspect for cracks or damage.
4. Replace with a new charcoal canister if necessary and reconnect hoses.