FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) has a service engine soon light on what now - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) has a service engine soon light on what now

my Toyota Corolla E170 (2013-2019) has a service engine soon light on what now

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
524 words

Problem Statement

Learn how to diagnose and fix the Service Engine Soon light on your 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough engine idle
  • •Decreased fuel efficiency
  • •Engine stalling during acceleration
  • •Unusual engine noises
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrench set
  • •Fuel pressure gauge
  • •Torque wrench
  • •Screwdriver set
  • •Vacuum gauge
  • •Oxygen sensor socket

Parts Required

  • •Spark plugs
  • •Fuel filter
  • •Oxygen sensors (if needed)
  • •Air filter

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
  • Allow the engine to cool down before starting the work.
2. Code Reading
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Turn the ignition to the "On" position without starting the engine.
  • Retrieve and record any trouble codes for further analysis.
3. Inspect and Replace Components

Fuel System

  • Tools Required: Wrench set, fuel pressure gauge
  • Sub-steps:
    • Check fuel pressure with a gauge; if low, inspect the fuel pump and filter.
    • Replace the fuel filter if clogged.

Ignition System

  • Tools Required: Socket set, torque wrench
  • Sub-steps:
    • Remove spark plug wires and inspect for wear or damage.
    • Replace worn spark plugs with OEM specifications (usually NGK or Denso).
    • Check ignition coils for proper operation; replace if faulty.

Air Intake System

  • Tools Required: Screwdriver set, vacuum gauge
  • Sub-steps:
    • Inspect the air filter for dirt; replace if necessary.
    • Check the intake manifold for vacuum leaks using a vacuum gauge.

Oxygen Sensors

  • Tools Required: Oxygen sensor socket, torque wrench
  • Sub-steps:
    • Locate the upstream and downstream oxygen sensors.
    • Remove and replace any faulty sensors, using the correct torque specifications.
4. Reconnect Battery
  • Reconnect the negative battery terminal.
  • Clear any error codes using the OBD-II scanner.
5. Final Checks
  • Start the engine and observe for any abnormal sounds or behavior.
  • Allow the engine to reach operating temperature and check for any warning lights.