FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) has a low coolant warning what should I check - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) has a low coolant warning what should I check

my Toyota Corolla E170 (2013-2019) has a low coolant warning what should I check

Toyota Corolla E170 (2013-2019)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
521 words

Problem Statement

Learn how to diagnose and fix low coolant warning in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Cooling System
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always allow the engine to cool before opening the radiator cap or coolant reservoir.
  • •Wear gloves and safety glasses when handling coolant as it can be toxic.

Symptoms

  • •Low coolant level in the reservoir
  • •Engine overheating
  • •Sweet smell of coolant inside or outside the vehicle
  • •Visible coolant leaks under the vehicle
  • •Steam or vapor from the engine bay
  • •Poor cabin heating performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Coolant
  • •Funnel
  • •Socket set
  • •Screwdrivers
  • •Cooling system pressure tester

Parts Required

  • •Coolant (specific to Toyota specifications)
  • •Replacement hoses or radiator (if damaged)

Additional Information

Affected Component
Cooling System
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery if necessary for safety.
2. Check and Top Off Coolant
  • Tools Required: Coolant, funnel.
  • Open the coolant reservoir cap, inspect the level.
  • If low, add the appropriate type of coolant (typically a 50/50 mix of distilled water and antifreeze).
  • Replace the cap securely.
3. Inspect for Leaks
  • Tools Required: None.
  • Visually inspect all hoses, the radiator, and the water pump.
  • Look for any signs of green, yellow, or pink fluid (colors vary depending on coolant type).
  • If leaks are found, proceed to repair or replace the affected components.
4. Replace Damaged Components
  • Tools Required: Socket set, screwdrivers.
  • If any hoses or the radiator show signs of damage, remove them carefully.
  • Install new hoses or radiator by reversing the removal process.
  • Ensure all clamps are tightened to the manufacturer's specifications.
5. Pressure Test and Monitor
  • Tools Required: Cooling system pressure tester.
  • Attach the pressure tester to the radiator filler neck.
  • Pump to the specified pressure (usually around 15-20 psi for most systems).
  • Monitor for any drop in pressure, indicating a leak, and inspect components again if needed.