FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) has a fuel smell, what should I check? - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) has a fuel smell, what should I check?

my Toyota Corolla E170 (2013-2019) has a fuel smell, what should I check?

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
528 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel smell issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on fuel systems.
  • •Allow the engine to cool before inspecting fuel components.
  • •Work in a well-ventilated area to avoid inhaling fuel vapors.

Symptoms

  • •Noticeable fuel odor inside or around the vehicle
  • •Fuel leaks under the car
  • •Reduced fuel efficiency
  • •Engine stalling or rough idling
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrenches
  • •Jack and jack stands
  • •Safety gloves
  • •Safety goggles

Parts Required

  • •Fuel lines (if damaged)
  • •Fuel injectors (if defective)
  • •Fuel tank (if leaking)
  • •Fuel cap (if worn)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Ensure the vehicle is parked on a level surface.
  • Wear safety gloves and goggles.
2. Inspect and Replace Fuel Lines
  • Sub-steps:
    1. Disconnect the negative battery terminal to prevent electrical hazards.
    2. Lift the vehicle using a jack and secure it with jack stands.
    3. Locate the fuel lines running from the tank to the engine.
    4. Use a socket set to disconnect the fuel lines at both ends.
    5. Inspect the lines for cracks or leaks; replace if necessary.
    6. Reconnect the new fuel lines, ensuring they are secured properly.
3. Check and Replace Fuel Injectors
  • Sub-steps:
    1. Disconnect the electrical connectors from the fuel injectors.
    2. Remove the fuel rail by unscrewing the bolts with a socket set.
    3. Carefully pull the fuel injectors from the rail.
    4. Inspect each injector for damage; replace any faulty injectors.
    5. Reinstall the fuel injectors and secure the fuel rail back into place.
4. Inspect Fuel Tank
  • Sub-steps:
    1. If necessary, lower the fuel tank by removing the securing bolts.
    2. Visually inspect the tank for any signs of leaks or corrosion.
    3. If a leak is found, replace the fuel tank with a new one.
    4. Reinstall the tank and secure it properly.
5. Check Fuel Cap
  • Sub-steps:
    1. Remove the fuel cap and inspect the rubber seal for wear or damage.
    2. Clean any debris from the sealing surface.
    3. Replace the fuel cap if the seal is compromised.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Wrenches
  • Jack and jack stands
  • Safety gloves and goggles

Parts Required:

  • Fuel lines (if damaged)
  • Fuel injectors (if defective)
  • Fuel tank (if leaking)
  • Fuel cap (if worn)

Estimated Repair Time: 2-4 hours

Safety Warnings:

  • Disconnect the battery before working on fuel systems.
  • Allow the engine to cool before inspecting fuel components.
  • Work in a well-ventilated area to avoid inhaling fuel vapors.