FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) has a fuel smell after refueling what could cause it - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) has a fuel smell after refueling what could cause it

my Toyota Corolla E170 (2013-2019) has a fuel smell after refueling what could cause it

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel smell after refueling in Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the fuel system.
  • •Work in a well-ventilated area to avoid inhaling fumes.

Symptoms

  • •Strong fuel odor near the fuel filler cap
  • •Fuel leakage observed on the ground underneath the vehicle
  • •Check engine light illuminated
  • •Fuel gauge not functioning properly
  • •Evaporative emissions system warning

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Compressed air source

Parts Required

  • •Fuel filler cap
  • •Fuel lines (if damaged)
  • •EVAP canister (if damaged)
  • •Fuel pump (if defective)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery cable to prevent electrical shorts.
2. Inspect and Replace Fuel Filler Cap
  • Remove the fuel filler cap and inspect for any cracks or damage.
  • If damaged, replace with a new fuel filler cap.
  • Reinstall the cap and ensure it is tightened properly.
3. Repair or Replace Fuel Lines
  • Use a socket set to remove any components obstructing access to the fuel lines.
  • Inspect the fuel lines for cracks or signs of wear.
  • If leaks are found, replace the damaged section of the fuel line using appropriate fittings and clamps.
  • Ensure all connections are secured and leak-free.
4. Repair or Replace Evaporative Emissions System Components
  • Locate the EVAP canister and check for cracks or blockages.
  • If damaged, replace the EVAP canister and any associated hoses.
  • Clear any obstructions in the system using compressed air if necessary.
5. Test and Replace Fuel Pump if Necessary
  • Connect a fuel pressure gauge to check the fuel pump operation.
  • If the pressure is below specifications, remove the fuel pump assembly from the tank.
  • Replace the fuel pump with a new unit if defective, following manufacturer specifications.
  • Reinstall the assembly and ensure all seals are properly placed to prevent leaks.