FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) has a check engine light and poor fuel economy - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) has a check engine light and poor fuel economy

my Toyota Corolla E170 (2013-2019) has a check engine light and poor fuel economy

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
527 words

Problem Statement

Learn to diagnose and fix check engine light and poor fuel economy in Toyota Corolla E170 (2013-2019). Step-by-step guide with tools and parts required.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool down before performing any repairs on the exhaust system.

Symptoms

  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough idle
  • •Loss of power during acceleration
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •O2 sensor socket
  • •Ratchet
  • •Torque wrench
  • •Penetrating oil
  • •Spark plug socket
  • •Dielectric grease
  • •Vacuum gauge
  • •Hose clamps

Parts Required

  • •New oxygen sensors
  • •New spark plugs
  • •Air filter (if needed)
  • •Intake hoses (if damaged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
9 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Address Faulty Oxygen Sensors
  • Tools Required: O2 sensor socket, ratchet, torque wrench, penetrating oil.
  • Remove the defective oxygen sensor using the O2 sensor socket.
  • Clean the mounting threads in the exhaust system.
  • Install the new oxygen sensor, torque it to manufacturer specifications (usually around 30 Nm).
  • Reconnect the sensor's electrical connector.
3. Replace Spark Plugs
  • Tools Required: Spark plug socket, torque wrench, dielectric grease.
  • Remove the ignition coils by unscrewing the retaining bolts.
  • Take out the old spark plugs using the spark plug socket.
  • Inspect the spark plug gap and adjust to the recommended specification (typically between 0.028” to 0.031”).
  • Install new spark plugs, ensuring they are torqued to approximately 13 Nm.
  • Apply dielectric grease to the ignition coil boots before reinstalling them.
4. Check for Air Intake Leaks
  • Tools Required: Vacuum gauge, hose clamps.
  • Inspect the air intake hoses and connections for cracks or leaks.
  • If leaks are found, replace the affected hoses or use hose clamps to secure loose connections.
  • Ensure the air filter is clean; replace it if necessary.
5. Reset Engine Codes
  • Reconnect the negative battery terminal.
  • Use the OBD-II scanner to clear the check engine codes.
  • Start the vehicle and allow it to idle, monitoring for any reoccurrence of the check engine light.