FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) engine revs but the car won't move, what's wrong? - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) engine revs but the car won't move, what's wrong?

my Toyota Corolla E170 (2013-2019) engine revs but the car won't move, what's wrong?

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on any components to avoid burns.

Symptoms

  • •Engine revs freely without engaging the transmission
  • •No movement when shifting into drive or reverse
  • •Possible transmission fluid leak under the vehicle
  • •Unusual noises from the transmission while revving
  • •Dashboard warning lights may be illuminated (e.g., check engine light)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Transmission fluid pump
  • •Funnel
  • •Drain pan
  • •Socket set
  • •Wrench set
  • •Screwdriver

Parts Required

  • •Transmission fluid
  • •Transmission filter (if necessary)
  • •Gasket for transmission pan

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for repair.
  • Ensure the vehicle is parked on a level surface and engage the parking brake.
  • Disconnect the battery to prevent electrical issues during repairs.
2. Check and Replace Transmission Fluid
  • Tools Required: Transmission fluid pump, funnel, drain pan, socket set.
  • If fluid is low or burnt, drain the old transmission fluid:
    1. Place the drain pan under the transmission pan.
    2. Remove the pan bolts using the socket set and carefully lower the pan.
    3. Allow the fluid to fully drain.
  • Sub-steps:
    1. Inspect the transmission filter and replace if necessary.
    2. Clean the transmission pan and magnet.
    3. Reinstall the pan with a new gasket, ensuring bolts are torqued to the manufacturer's specifications.
    4. Refill the transmission with the correct type of fluid through the dipstick tube using a funnel.
3. Inspect and Repair Transmission Linkage
  • Tools Required: Wrench set, screwdriver.
  • Inspect the transmission linkage:
    1. Locate the linkage connecting the gear shift to the transmission.
    2. Check for any loose or disconnected components.
    3. Tighten or repair any damaged parts as necessary.
4. Transmission Control Module (TCM) Inspection
  • Tools Required: OBD-II scanner.
  • If no linkage issues are found, check the TCM:
    1. Scan for relevant trouble codes.
    2. If codes indicate a TCM issue, consider resetting the TCM or replacing it if deemed necessary.