FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) AC compressor won't turn on how to fix it - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) AC compressor won't turn on how to fix it

my Toyota Corolla E170 (2013-2019) AC compressor won't turn on how to fix it

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
529 words

Problem Statement

Learn how to diagnose and fix AC compressor issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the hood or working on the AC system.

Symptoms

  • •AC system not producing cold air
  • •AC compressor clutch not engaging
  • •Unusual noises from the engine bay when AC is activated
  • •"Check AC" warning light illuminated on the dashboard
  • •Increased cabin humidity

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuse puller
  • •Refrigerant gauge set
  • •Multimeter
  • •Electrical contact cleaner

Parts Required

  • •AC fuse (if necessary)
  • •AC relay (if necessary)
  • •Refrigerant (R-134a)
  • •AC compressor clutch coil (if necessary)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery cable to ensure safety.
  • Allow the engine to cool before beginning work.
2. Check and Replace Fuses/Relays
  • Locate the fuse box under the dashboard or engine bay.
  • Remove the AC fuse and relay using a fuse puller.
  • Inspect them for continuity. If faulty, replace with the same amperage rating.
  • Reinstall the new fuse and relay.
3. Recharge the AC System
  • Connect a refrigerant gauge set to the low-pressure service port.
  • Check the refrigerant level. If low, proceed to recharge.
  • Follow refrigerant manufacturer instructions, adding the correct type and amount of refrigerant (typically R-134a).
  • Monitor the gauge to ensure proper pressure levels are achieved.
4. Inspect and Repair Electrical Connections
  • Visually inspect the wiring harness connected to the AC compressor for any signs of damage or corrosion.
  • Clean or repair any corroded terminals using electrical contact cleaner.
  • If necessary, replace damaged wiring with OEM parts.
5. Test the AC Compressor Clutch
  • Reconnect the battery and test the AC system.
  • With the engine running and AC set to maximum, observe if the compressor clutch engages.
  • If it does not engage, replace the compressor clutch coil or the entire compressor if needed.