how to troubleshoot noise when turning in my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

528 words

Problem Statement

Learn how to troubleshoot and fix noise when turning in a 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostics, and solutions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Always use jack stands when working under the vehicle.

Symptoms

•Clicking or popping noise while turning
•Grinding sound during turns
•Whining noise when steering
•Vibration in the steering wheel while turning
•Difficulty in steering or increased effort required
•Uneven tire wear

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage or wear on the CV joints and boots.
3
Examine the suspension components, including ball joints, struts, and control arms for any signs of wear or damage.
4
Test the steering rack for any play or leaks.
5
Inspect the tires for uneven wear patterns or foreign objects lodged in the tread.
6
Listen for noise while turning the steering wheel in place to isolate the source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Screwdriver set
•Power steering fluid

Parts Required

•CV joint (if damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage or wear on the CV joints and boots.
3
Examine the suspension components, including ball joints, struts, and control arms for any signs of wear or damage.
4
Test the steering rack for any play or leaks.
5
Inspect the tires for uneven wear patterns or foreign objects lodged in the tread.
6
Listen for noise while turning the steering wheel in place to isolate the source.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Disconnect the battery to ensure safety while working on electrical components.

2. Check and Refill Power Steering Fluid

Locate the power steering fluid reservoir.
Remove the cap and check the fluid level.
If low, add the appropriate type of power steering fluid as specified in the owner’s manual.

3. Inspect and Replace CV Joints (if damaged)

Raise the front of the vehicle using a jack and secure it with jack stands.
Remove the wheel to access the CV joint.
Inspect the CV boot for tears or grease leakage.
If damaged, remove the CV joint using a socket set and replace it with a new one. Torque the bolts to the manufacturer's specifications.

4. Inspect and Replace Suspension Components (if necessary)

Check the ball joints and control arms for play.
If any component is worn, remove it using a socket set and replace it with new parts.
Ensure all fasteners are torqued to manufacturer specifications.

5. Test Drive and Adjust Steering Rack (if needed)

After repairs, reassemble any removed components.
Test drive the vehicle to assess the steering response and noise.
If the noise persists, further adjustment or replacement of the steering rack may be necessary.