how to troubleshoot my Toyota Corolla E170 (2013-2019) that makes a clicking noise?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

541 words

Problem Statement

Learn how to troubleshoot and fix clicking noise in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery before working on electrical components.

Symptoms

•Intermittent clicking noise while driving
•Clicking noise occurs during acceleration or turning
•Noise is more pronounced at low speeds
•Possible vibrations felt through the steering wheel
•No warning lights illuminated on the dashboard

Diagnostic Steps

1
Inspect the Wheel Wells: Check for debris or foreign objects lodged in the wheel wells or brake components.
2
Check CV Joints: Inspect the constant velocity (CV) joints for any signs of wear or damage.
3
Examine Suspension Components: Visually inspect suspension parts, including struts, bushings, and control arms for any signs of looseness or wear.
4
Tire Inspection: Check for uneven tire wear, which may indicate alignment issues or suspension problems.
5
Listen for Source of Noise: While driving in a safe area, have a passenger listen closely to pinpoint the source of the clicking noise.
6
Check Engine and Transmission Mounts: Inspect mounts for any signs of wear or damage that may transmit noise.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Flathead screwdriver
•Tire pressure gauge

Parts Required

•CV joint (if necessary)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the Wheel Wells: Check for debris or foreign objects lodged in the wheel wells or brake components.
2
Check CV Joints: Inspect the constant velocity (CV) joints for any signs of wear or damage.
3
Examine Suspension Components: Visually inspect suspension parts, including struts, bushings, and control arms for any signs of looseness or wear.
4
Tire Inspection: Check for uneven tire wear, which may indicate alignment issues or suspension problems.
5
Listen for Source of Noise: While driving in a safe area, have a passenger listen closely to pinpoint the source of the clicking noise.
6
Check Engine and Transmission Mounts: Inspect mounts for any signs of wear or damage that may transmit noise.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Disconnect the battery (if needed) for electrical safety.

2. Inspect and Clear Wheel Wells

Remove any debris found in the wheel wells using a flathead screwdriver or compressed air.
Tools Required: Flathead screwdriver, compressed air (optional).

3. Inspect and Replace CV Joints

Lift the vehicle using a jack and secure it with jack stands.
Remove the front wheels to access the CV joints.
Inspect the rubber boots for tears or leaks and check the joint for play.
If damaged, replace the CV joint with a new one, ensuring to torque the axle nut to the manufacturer's specifications (typically around 130 ft-lbs).
Tools Required: Jack and jack stands, socket set, torque wrench.

4. Examine and Replace Suspension Components

Inspect struts, control arms, and bushings for any wear.
Replace any worn components as necessary, ensuring all bolts are torqued to specification.
Tools Required: Socket set, torque wrench.

5. Adjust or Replace Tires

Check tires for uneven wear; if uneven, rotate or replace tires as necessary.
Ensure proper tire pressure is maintained (check manufacturer specifications).
Tools Required: Tire pressure gauge, jack and jack stands (if changing tires).