how to reset the TPMS light on Toyota Corolla E170 (2013-2019) after tire change

Toyota Corolla E170 (2013-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

3 min read

407 words

Problem Statement

Learn how to reset the TPMS light on a 2013-2019 Toyota Corolla E170 after a tire change. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and on a level surface while resetting the TPMS.

Symptoms

•TPMS warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Warning light remains after checking tire pressures
•Vehicle handling issues due to improper tire inflation

Diagnostic Steps

1
Confirm that all tires are inflated to the recommended pressure listed on the driver’s door jamb.
2
Inspect the tire pressure sensors for any damage or malfunction.
3
Verify that the spare tire (if applicable) does not have a TPMS sensor that is causing the light to remain on.
4
Attempt to reset the TPMS using the vehicle's reset procedure.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None required for reset procedure; however, replace any faulty TPMS sensors if necessary.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Confirm that all tires are inflated to the recommended pressure listed on the driver’s door jamb.
2
Inspect the tire pressure sensors for any damage or malfunction.
3
Verify that the spare tire (if applicable) does not have a TPMS sensor that is causing the light to remain on.
4
Attempt to reset the TPMS using the vehicle's reset procedure.

Solution

1. Preparation

Ensure all tires are properly inflated to the recommended pressure.
Gather required tools: key fob or ignition key.

2. Reset TPMS

Turn the Ignition On:
- Insert the ignition key and turn it to the "ON" position without starting the engine.
- If equipped with a push-button start, press the "Start" button twice without pressing the brake pedal.
Locate TPMS Reset Button:
- Find the TPMS reset button, which is usually located beneath the steering wheel or in the glove compartment.
Press and Hold TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
Drive the Vehicle:
- Drive the vehicle for about 10-15 minutes at a speed of 25 mph or higher. This allows the system to recalibrate and recognize the new tire pressures.

3. Check for Light Reset

After driving, if the TPMS light does not turn off, repeat the reset procedure.