how to reset the tire pressure light on Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

506 words

Problem Statement

Learn how to reset the tire pressure light on your 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before checking tire pressure.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Inconsistent tire pressure readings on the gauge
•Tire pressure light remains on after inflating tires to recommended levels
•Possible triggering of other warning lights related to tire system
•Vehicle may exhibit uneven tire wear if not addressed

Diagnostic Steps

1
Verify tire pressures using a reliable tire pressure gauge and ensure all tires, including the spare, are inflated to the recommended levels.
2
Check the vehicle's owner manual for specific tire pressure settings and TPMS reset instructions.
3
Inspect each tire for visible damage or leaks that may cause pressure loss.
4
Use an OBD-II scanner to check for any TPMS-related error codes that may indicate sensor issues.
5
Confirm that the TPMS sensors are functioning correctly by monitoring the system for any abnormal behavior.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner (optional)

Parts Required

•None (unless TPMS sensors need replacement)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Tire pressure warning light is illuminated on the dashboard

•Inconsistent tire pressure readings on the gauge

•Tire pressure light remains on after inflating tires to recommended levels

•Possible triggering of other warning lights related to tire system

•Vehicle may exhibit uneven tire wear if not addressed

Diagnostic Steps

1
Verify tire pressures using a reliable tire pressure gauge and ensure all tires, including the spare, are inflated to the recommended levels.
2
Check the vehicle's owner manual for specific tire pressure settings and TPMS reset instructions.
3
Inspect each tire for visible damage or leaks that may cause pressure loss.
4
Use an OBD-II scanner to check for any TPMS-related error codes that may indicate sensor issues.
5
Confirm that the TPMS sensors are functioning correctly by monitoring the system for any abnormal behavior.

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure (refer to the placard located on the driver’s side door jamb for specifications).
Gather the necessary tools: a tire pressure gauge, OBD-II scanner (if needed), and the vehicle owner's manual.

2. Reset TPMS Light

Turn On the Ignition:
- Insert the key and turn the ignition switch to the "ON" position without starting the engine.
Locate the TPMS Reset Button:
- Find the TPMS reset button, typically located below the steering column or near the driver's side dashboard.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the tire pressure warning light blinks three times and then remains on.
Start the Engine:
- Start the engine and let it run for a few minutes to allow the system to recalibrate.
Check the Light:
- After a few minutes of driving, the tire pressure warning light should turn off if the reset was successful.

3. Final Checks

After resetting, monitor the tire pressure light during subsequent drives to ensure it remains off and no further issues arise.