how to reset the service light on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

381 words

Problem Statement

Learn how to reset the service light on your 2013-2019 Toyota Corolla E170. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral if manual) to prevent rolling while working with the ignition.

Symptoms

•Service light is illuminated on the dashboard
•Maintenance reminder message appears
•Vehicle has been serviced but warning light remains on

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (to access the 'On' position).
3
Locate the odometer/trip meter button on the instrument cluster.
4
Press and hold the odometer/trip meter button while turning the ignition to the 'On' position.
5
Continue holding the button until the service light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (to access the 'On' position).
3
Locate the odometer/trip meter button on the instrument cluster.
4
Press and hold the odometer/trip meter button while turning the ignition to the 'On' position.
5
Continue holding the button until the service light blinks and then turns off.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface with the ignition off.

2. Access the Ignition

Insert the key into the ignition or press the start button without the brake pedal to turn on the electrical system.
Make sure all accessories are off to avoid interference.

3. Reset the Service Light

Locate the odometer/trip meter button on the dashboard.
Press and hold the odometer button while turning the ignition switch to the "On" position (not starting the engine).
Continue holding the button until the service light flashes and then turns off, usually after about 10 seconds.

4. Verify Reset

Release the odometer button.
Turn off the ignition and then turn it back on to ensure the service light is no longer illuminated.