how to reset the oil light on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

378 words

Problem Statement

Learn how to reset the oil light on your Toyota Corolla E170 (2013-2019) after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is parked securely and the engine is off before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Maintenance reminder message displayed on the instrument panel
•Engine oil has been changed but warning light is still on

Diagnostic Steps

1
Ensure the engine is turned off and the vehicle is in the park position.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition off, then turn it back to the 'ON' position again to check if the oil light has reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required.

Parts Required

•No parts required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the engine is turned off and the vehicle is in the park position.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition off, then turn it back to the 'ON' position again to check if the oil light has reset.

Solution

1. Preparation

Gather necessary tools:
- No special tools are required for this reset.
Ensure the vehicle is parked on a level surface with the engine off.

2. Access the Ignition

Insert the key into the ignition or ensure the key fob is in the vehicle if it has a push-button start.

3. Turn on the Ignition

Turn the key to the "ON" position (do not start the engine). If using a push-button start, press the button twice without pressing the brake pedal.

4. Reset the Oil Light

Quickly press the gas pedal three times within five seconds.
Ensure you are pressing the pedal all the way down to register the input.

5. Confirm Reset

Turn the ignition off and then back to the "ON" position to verify that the oil light is no longer illuminated.