how to reset the oil change light on my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the oil change light on your Toyota Corolla E170 (2013-2019) with this step-by-step guide. Ensure your maintenance lights are off.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and parked securely before performing the reset.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance required light is displayed
•No engine performance issues related to oil change

Diagnostic Steps

1
Verify that the oil change has been completed and the oil filter has been replaced.
2
Ensure the vehicle is in the 'ON' position without starting the engine.
3
Check for any additional maintenance indicators that may also need resetting.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key or remote

Parts Required

•None required for resetting

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure that the vehicle is parked on a level surface and the engine is off.
Gather necessary tools including the vehicle key or remote.

2. Access the Odometer Display

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
If your Corolla has a push-button start, press the "Start" button twice while keeping your foot off the brake.

3. Reset the Oil Change Light

Using the trip meter reset button on the instrument panel, press and hold the button until the odometer display shows "000000".
While still holding the button, turn the ignition off and then back to the "ON" position again.
Continue holding the trip reset button until the oil change light turns off (may take about 10 seconds).

4. Confirm Reset

Release the trip meter reset button.
Turn the ignition off and then start the engine to confirm the oil change light is off.