FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light on Toyota Corolla E170 (2013-2019)

how to reset the maintenance light on Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
376 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170. Follow our step-by-step guide for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or other service displayed
  • •Vehicle maintenance history not updated in the system

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in the "ON" position without starting the engine.
  • Have the odometer/trip meter reset button accessible.
2. Resetting the Maintenance Light

  1. Turn on the Ignition:

    • Turn the key to the "ON" position without starting the engine. For push-button models, press the "Start" button twice without pressing the brake pedal.

  2. Set Odometer to Trip A:

    • Press the trip meter reset button until the odometer displays "Trip A."

  3. Turn Off the Ignition:

    • Turn the ignition switch to the "OFF" position.

  4. Press and Hold the Reset Button:

    • While holding the trip meter reset button, turn the ignition back to the "ON" position.

  5. Wait for the Maintenance Light to Blink:

    • Continue to hold the button until the maintenance light blinks and then stays on for a few seconds.

  6. Release the Button:

    • Release the trip meter reset button.

  7. Confirm Reset:

    • Turn the ignition back to the "OFF" position and then back to "ON" to confirm that the maintenance light is no longer illuminated.