FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light on Toyota Corolla E170 (2013-2019)

how to reset the maintenance light on Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
464 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2019 Toyota Corolla E170. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Make sure the vehicle is in park or neutral with the parking brake engaged while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for service displayed on the driver's information screen
  • •No other performance issues typically associated with the maintenance light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a flat surface with the engine off.
2. Resetting the Maintenance Light

  1. Turn Off the Vehicle

    • Ensure the car is completely turned off with the key removed or in the "OFF" position.

  2. Enter the ON Position

    • Press the "START" button without pressing the brake, or turn the ignition key to the "ON" position to power the electrical systems without starting the engine.

  3. Set Odometer Display

    • Locate the odometer/trip reset button on the dashboard.
    • Press and hold the button until the odometer display shows "000000" or "TRIP A".

  4. Cycle the Ignition

    • While holding the odometer button, turn the vehicle key to the "OFF" position and then back to "ON" without starting the engine.

  5. Complete the Reset

    • Release the odometer button after a few seconds; the maintenance light should blink and then turn off, indicating a successful reset.