how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes

Less than 15 minutes

Time

easy

Difficulty

low

Severity

2 min read

309 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170 with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operates normally aside from the maintenance reminder

Diagnostic Steps

1
Ensure the vehicle is in 'Run' mode without starting the engine (press the push-to-start button twice without pressing the brake)
2
Locate the trip reset button on the instrument cluster
3
Turn the ignition off completely
4
Press and hold the trip reset button, then turn the ignition back to 'Run' mode while continuing to hold the button
5
Release the trip reset button once the maintenance light begins to flash and then turns off

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in 'Run' mode without starting the engine (press the push-to-start button twice without pressing the brake)
2
Locate the trip reset button on the instrument cluster
3
Turn the ignition off completely
4
Press and hold the trip reset button, then turn the ignition back to 'Run' mode while continuing to hold the button
5
Release the trip reset button once the maintenance light begins to flash and then turns off

Solution

1. Preparation

Gather necessary tools: None required for this reset.
Ensure the vehicle is safely parked and in "Run" mode.

2. Reset Maintenance Light

Turn off the vehicle completely.
Press and hold the trip reset button located on the dashboard.
While holding the button, turn the ignition to "Run" mode (do not start the engine).
Continue holding the trip reset button until the maintenance light starts to flash.
Release the trip reset button when the maintenance light turns off, confirming the reset is complete.