FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)

how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
388 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170. Step-by-step guide to clear the light after maintenance.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other performance issues present
  • •Need to clear the light after an oil change or service

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this process.

Parts Required

  • •None required for this process.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is turned off.
  • Gather necessary items: key fob and access to the vehicle’s interior.
2. Reset the Maintenance Light

  1. Turn Off Ignition:

    • Ensure the ignition switch is in the "OFF" position.

  2. Press and Hold Odometer Reset Button:

    • Locate the odometer reset button on the instrument cluster.
    • Press and hold this button down.

  3. Turn Ignition to "ON":

    • While continuing to hold the odometer reset button, turn the ignition switch to the "ON" position (do not start the engine).

  4. Wait for the Maintenance Light to Reset:

    • Keep holding the odometer reset button until the maintenance light blinks and then turns off, which typically takes about 10 seconds.

  5. Release the Odometer Reset Button:

    • Once the light is off, release the reset button. The maintenance light should now be reset.