how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

337 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170 with this step-by-step guide. Quick and easy instructions for maintenance light reset.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other performance issues present
•Vehicle has undergone maintenance service (oil change, filter replacement, etc.)

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the 'Odometer' button until the trip meter displays 'Trip A.'
3
Turn off the ignition.
4
While holding the 'Odometer' button, turn the ignition back to the 'On' position.
5
Continue to hold the button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the 'Odometer' button until the trip meter displays 'Trip A.'
3
Turn off the ignition.
4
While holding the 'Odometer' button, turn the ignition back to the 'On' position.
5
Continue to hold the button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Gather necessary materials: keys, and ensure the vehicle is parked safely.
Ensure all doors are closed for proper system function.

2. Set the Odometer

With the vehicle turned off, press the "Odometer" button.
Release the button once the display shows "Trip A."

3. Turn Off the Ignition

Turn the ignition key to the "Off" position.

4. Reset the Maintenance Light

While holding the "Odometer" button, turn the ignition key back to the "On" position (do not start the engine).
Continue holding the button until the maintenance light blinks and then turns off (this may take about 10 seconds).

5. Confirmation

Release the "Odometer" button.
Turn the ignition off and then back on to verify that the maintenance light is no longer illuminated.