how to reset the maintenance light on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

391 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170. Step-by-step guide to clear reminders after maintenance services.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged during the process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for upcoming maintenance not clearing
•No abnormal vehicle performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the instrument cluster.
3
Turn the ignition to the 'ON' position without starting the engine.
4
Continue to hold the trip meter reset button until the maintenance light blinks and then turns off.
5
Release the trip meter reset button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this process.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the instrument cluster.
3
Turn the ignition to the 'ON' position without starting the engine.
4
Continue to hold the trip meter reset button until the maintenance light blinks and then turns off.
5
Release the trip meter reset button.

Solution

1. Preparation

Gather all necessary tools and ensure the vehicle is parked on a level surface.
Ensure the ignition key or fob is available.

2. Reset the Maintenance Light

Turn Off the Vehicle
- Ensure the engine is completely off before proceeding.
Press and Hold the Trip Meter Reset Button
- Locate the trip meter reset button on the instrument cluster and press it down firmly.
Turn Ignition to ON
- Without starting the engine, turn the ignition key to the "ON" position. (For push-button start, press the start button without pressing the brake pedal.)
Monitor the Maintenance Light
- Keep holding the trip meter reset button until the maintenance light blinks and then turns off. This may take a few seconds.
Release the Trip Meter Reset Button
- Once the light is off, release the trip meter reset button.

3. Verify Reset

Turn the ignition off and then back on to confirm the maintenance light is no longer illuminated.