FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light in Toyota Corolla E170 (2013-2019)

how to reset the maintenance light in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
357 words

Problem Statement

Learn how to reset the maintenance light on Toyota Corolla E170 (2013-2019) with this simple step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notification for service due
  • •No engine performance issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this reset procedure.
  • Ensure that the vehicle is parked on a flat surface and in the "OFF" position.
2. Reset Maintenance Light

  1. Locate the Trip Meter Reset Button

    • Find the trip meter reset button on the instrument cluster; it is typically located near the speedometer.

  2. Hold the Trip Meter Reset Button

    • Press and hold the trip meter reset button. Do not release it until instructed.

  3. Turn Ignition to ON

    • With the button still held, turn the ignition key to the "ON" position (do not start the engine).

  4. Wait for the Light to Reset

    • Continue holding the trip meter reset button. Watch for the maintenance light to blink and then extinguish, indicating a successful reset.

  5. Release the Trip Meter Reset Button

    • Once the light turns off, release the trip meter reset button.