FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset the maintenance light in Toyota Corolla E170 (2013-2019)

how to reset the maintenance light in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
401 words

Problem Statement

Learn how to reset the maintenance light in a 2013-2019 Toyota Corolla E170. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Possible reminder notifications on the multi-information display
  • •No impact on vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools required for resetting.

Parts Required

  • •No parts required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is off.
  • Gather necessary tools, if any (typically, none are required for this reset).
2. Resetting the Maintenance Light
  1. Position the Vehicle: Park the vehicle safely and ensure it is in the "OFF" position.
  2. Press and Hold: Locate the trip meter reset button on the instrument panel (usually found on the dashboard).
    • Tip: The button may be labeled as "Trip" or may have a symbol indicating a reset feature.
  3. Ignition Key Turn: While keeping the trip meter reset button pressed, turn the ignition key to the "ON" position (do not start the engine).
    • Note: You should see the dashboard lights illuminate but not the engine starting.
  4. Wait for the Light to Blink: Continue holding the button until the maintenance light blinks and then turns off. This indicates the reset process is complete.
  5. Release and Turn Off: Release the trip meter reset button and turn the ignition off completely.