how to reset the check engine light in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

0.5 hours

Time

easy

Difficulty

medium

Severity

2 min read

380 words

Problem Statement

Learn how to reset the check engine light in your 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

0.5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the ignition is off before connecting or disconnecting the OBD-II scanner.

Symptoms

•Check engine light illuminated
•Possible diagnostic trouble codes (DTCs) stored in the vehicle's computer
•Vehicle may exhibit no abnormal performance issues
•Recent repairs may have been made that require the light to be reset

Diagnostic Steps

1
Use an OBD-II scanner to check for any stored trouble codes.
2
Address any underlying issues indicated by the trouble codes.
3
Ensure the gas cap is properly tightened, as this can trigger the check engine light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a level surface with the engine off.

2. Connect OBD-II Scanner

Locate the OBD-II port, usually found under the dashboard near the driver's seat.
Plug in the OBD-II scanner.

3. Read Codes

Turn the ignition key to the "ON" position without starting the engine.
Follow the scanner’s instructions to read and record any diagnostic trouble codes.
Clear any codes if the underlying issue has been resolved.

4. Clear Check Engine Light

On the OBD-II scanner, select the option to "Clear Codes" or "Erase Codes."
Confirm the action on the scanner. The check engine light should turn off.

5. Disconnect Scanner

Safely remove the OBD-II scanner from the port.
Ensure all connections are secure.