FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on Toyota Corolla E170 (2013-2019)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset maintenance light on Toyota Corolla E170 (2013-2019)?

how to reset maintenance light on Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
416 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2019 Toyota Corolla E170 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral and on a flat surface before performing the reset to avoid any unintended movement.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other engine warning lights present
  • •Vehicle maintenance completed (oil change, filter replacement, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools, such as a flathead screwdriver if needed for the trip reset button.
  • Ensure the vehicle is parked on a level surface and the ignition is in the "Off" position.
2. Reset Maintenance Light

  1. Turn Ignition On

    • Insert the key and turn it to the "On" position, but do not start the engine.

  2. Set Odometer to Trip A

    • Press the trip meter button until the display shows "Trip A." This is typically done by pressing the button on the instrument cluster.

  3. Turn Ignition Off

    • Turn the ignition key back to the "Off" position.

  4. Reset Button Procedure

    • Press and hold the trip meter reset button on the dashboard.

  5. Turn Ignition On Again

    • While still holding the trip meter reset button, turn the ignition key back to the "On" position.

  6. Release Button

    • Continue to hold the trip meter reset button until the maintenance light flashes and then turns off, indicating a successful reset.