FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to reset maintenance light on Toyota Corolla E170 (2013-2019)

how to reset maintenance light on Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
328 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2019 Toyota Corolla E170. Follow our step-by-step guide for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a level surface before performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other warning lights are present
  • •Vehicle has recently undergone routine maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is off.
  • Gather necessary tools: none required for this process.
2. Reset Maintenance Light
  1. Turn Off Ignition: Ensure the ignition switch is in the "OFF" position.
  2. Press and Hold Trip Meter Reset Button: Locate the trip meter reset button on the instrument cluster and press it down.
  3. Turn Ignition to "ON" Position: Without starting the engine, turn the ignition switch to the "ON" position. The dashboard lights will illuminate.
  4. Hold Until Light Resets: Continue to hold the trip meter reset button for approximately 5 seconds until the maintenance light blinks and then turns off. This indicates the reset is successful.
  5. Release Button: Release the trip meter reset button.