how to fix transmission problems in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

570 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission problems in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan.

Symptoms

•Erratic shifting or delayed engagement
•Transmission slipping (engine revs without acceleration)
•Unusual noises (grinding or whining) from the transmission
•Warning lights illuminated on the dashboard (e.g., check engine light)
•Fluid leaks under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition; inspect for discoloration or burnt smell.
3
Inspect the transmission linkage and cables for any signs of damage or misalignment.
4
Perform a visual inspection for external leaks in the transmission pan and seals.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Check for any software updates or recalls related to the transmission control unit.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Fluid pump

Parts Required

•Toyota ATF WS transmission fluid
•Transmission filter
•Gasket for transmission pan
•Transmission solenoids (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Check the transmission fluid level and condition; inspect for discoloration or burnt smell.
3
Inspect the transmission linkage and cables for any signs of damage or misalignment.
4
Perform a visual inspection for external leaks in the transmission pan and seals.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Check for any software updates or recalls related to the transmission control unit.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Wear safety glasses and gloves.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Wipe clean and reinsert to check fluid level.
3. If low, add the appropriate type of transmission fluid (Toyota ATF WS).
4. If fluid is burnt or dirty, drain the old fluid through the transmission pan drain plug.
5. Replace the fluid with new ATF WS fluid, ensuring the correct amount is added.

3. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by loosening the bolts with a socket set and gently prying it off.
2. Remove the old transmission filter and replace it with a new one.
3. Clean the transmission pan and magnet to remove any debris.
4. Reinstall the transmission pan with a new gasket and torque bolts to the manufacturer’s specifications.

4. Test Transmission Solenoids

Sub-steps:
1. Disconnect the battery to ensure safety before working with electrical components.
2. Remove the electrical connector from the solenoid.
3. Use a multimeter to check for resistance across the solenoid terminals (refer to the service manual for specific resistance values).
4. Replace any faulty solenoids with new parts.

5. Reprogram or Update Transmission Control Unit (if needed)

Sub-steps:
1. Connect an OBD-II scanner to the vehicle.
2. Check for any available software updates for the transmission control unit.
3. Follow the scanner's instructions to reprogram or update the ECU if necessary.