how to fix the traction control light on a Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

595 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in a 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on the brakes or any hot components.

Symptoms

•Traction control light illuminated on the dashboard
•Possible loss of traction during acceleration
•Engine power reduction when traction is lost
•Unusual noises from the wheels during traction control engagement
•Check engine light may also be illuminated

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to retrieve any error codes related to the traction control system.
2
Inspect the wheel speed sensors for damage, dirt, or disconnection; ensure they are securely connected.
3
Check the brake fluid level; low brake fluid can affect traction control functionality.
4
Inspect the ABS (Anti-lock Braking System) module for any faults or error codes.
5
Test the battery voltage and connections, as low voltage can affect traction control operation.
6
Examine the fuses related to the traction control system for any blown fuses.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter

Parts Required

•Wheel speed sensor (if faulty)
•Brake fluid (DOT 3 or DOT 4)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to retrieve any error codes related to the traction control system.
2
Inspect the wheel speed sensors for damage, dirt, or disconnection; ensure they are securely connected.
3
Check the brake fluid level; low brake fluid can affect traction control functionality.
4
Inspect the ABS (Anti-lock Braking System) module for any faults or error codes.
5
Test the battery voltage and connections, as low voltage can affect traction control operation.
6
Examine the fuses related to the traction control system for any blown fuses.

Solution

1. Preparation

Gather necessary tools and parts, and ensure the vehicle is parked on a level surface.
Disconnect the negative battery terminal to ensure safety while working on electrical components.

2. Check and Replace Wheel Speed Sensors

Remove the wheel of the affected tire using a socket set.
Locate the wheel speed sensor on the hub assembly.
Disconnect the sensor's electrical connector and inspect the wiring for damage.
If damaged, replace the wheel speed sensor with a new one, ensuring it is properly seated.
Reconnect the electrical connector and reinstall the wheel.
Repeat for each wheel if multiple sensors are suspected to be faulty.

3. Inspect and Refill Brake Fluid

Locate the brake fluid reservoir under the hood.
Check the fluid level; if low, refill with the manufacturer-recommended brake fluid (DOT 3 or DOT 4).
Look for leaks in brake lines and fittings. Repair any leaks found.

4. Check ABS Module and Fuses

Reconnect the battery and check for any error codes using the OBD-II scanner.
If codes related to the ABS module are present, inspect the module connections and wiring.
Check the fuse box for any blown fuses related to the traction control or ABS system. Replace any defective fuses with the correct amperage.

5. Reset the Traction Control Light

After completing repairs, clear any error codes from the OBD-II scanner.
Test drive the vehicle to ensure the traction control light does not reappear and that the system functions correctly.