how to fix the steering wheel shaking in Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

543 words

Problem Statement

Learn how to diagnose and fix steering wheel shaking in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Verify that the parking brake is engaged before lifting the vehicle.

Symptoms

•Steering wheel vibrates at certain speeds
•Uneven tire wear
•Pulling to one side while driving
•Exaggerated steering response
•Noise or clunking sounds when turning

Diagnostic Steps

1
Inspect tire pressure and ensure all tires are inflated to the manufacturer's specifications.
2
Check for visible damage or bulges on the tires.
3
Perform a wheel balance test using a wheel balancer.
4
Inspect the suspension components (e.g., tie rods, control arms) for wear or damage.
5
Check the wheel alignment using an alignment machine.
6
Test drive the vehicle to replicate the shaking and identify the speed range at which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Lug wrench
•Wheel balancer
•Alignment machine
•Torque wrench

Parts Required

•Replacement tires (if necessary)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and ensure all tires are inflated to the manufacturer's specifications.
2
Check for visible damage or bulges on the tires.
3
Perform a wheel balance test using a wheel balancer.
4
Inspect the suspension components (e.g., tie rods, control arms) for wear or damage.
5
Check the wheel alignment using an alignment machine.
6
Test drive the vehicle to replicate the shaking and identify the speed range at which it occurs.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and engage the parking brake.

Tools Required:

Tire pressure gauge
Jack and jack stands
Lug wrench
Wheel balancer
Alignment machine
Torque wrench

2. Tire Inspection and Replacement (if necessary)

Sub-steps:
1. Remove the wheel covers (if applicable) and loosen the lug nuts slightly.
2. Lift the vehicle using a jack and secure it with jack stands.
3. Remove the wheel and inspect the tire for any visible damage or excessive wear.
4. Replace the tire if it is damaged or worn unevenly.

3. Wheel Balancing

Sub-steps:
1. Mount the wheel on the wheel balancer.
2. Follow the balancer's instructions to check for imbalance.
3. Add weights as necessary to achieve balance.
4. Reinstall the balanced wheel onto the vehicle, ensuring proper torque on lug nuts (typically 76 lb-ft for Corolla).

4. Suspension Inspection and Repair

Sub-steps:
1. Inspect suspension components for any signs of wear or damage (e.g., bushings, tie rods).
2. Replace any worn or damaged components with new parts.
3. Reassemble any removed components and ensure proper torque specifications are met.

5. Wheel Alignment

Sub-steps:
1. Place the vehicle on the alignment rack.
2. Adjust the alignment settings according to the manufacturer's specifications.
3. Confirm that the steering wheel is centered and that the camber and toe angles are within specifications.
4. Test drive the vehicle after alignment to ensure the issue is resolved.