how to fix the rough shifting problem in my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

566 words

Problem Statement

Learn how to diagnose and fix rough shifting issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan to avoid burns.

Symptoms

•Harsh or jerky shifts between gears
•Delayed engagement when shifting from park to drive/reverse
•Unusual sounds during gear changes (grinding or clunking)
•Check engine light illuminated
•Fluid leaks under the vehicle
•Increased RPMs before shifting occurs

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission.
2
Inspect the transmission fluid level and condition (look for discoloration or burnt smell).
3
Check for signs of transmission fluid leaks around seals and gaskets.
4
Examine the transmission control module (TCM) for any faults or loose connections.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Inspect the engine mounts for wear or damage, as they can affect shifting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Drain pan

Parts Required

•Transmission fluid (Toyota Type T-IV)
•Transmission filter (if applicable)
•Gasket for transmission pan
•Transmission solenoids (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission.
2
Inspect the transmission fluid level and condition (look for discoloration or burnt smell).
3
Check for signs of transmission fluid leaks around seals and gaskets.
4
Examine the transmission control module (TCM) for any faults or loose connections.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Inspect the engine mounts for wear or damage, as they can affect shifting.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission fluid dipstick and check the fluid level.
2. If the fluid is low, add the appropriate type of transmission fluid as specified in the owner’s manual (typically Toyota Type T-IV).
3. If the fluid is dirty or burnt, drain the old fluid using a drain pan and replace it with fresh fluid.
4. Reinsert the dipstick and ensure the fluid level is within the recommended range.

3. Inspect and Replace Transmission Filter (if applicable)

Sub-steps:
1. Remove the transmission pan bolts with a socket set and carefully lower the pan.
2. Remove the old transmission filter and replace it with a new one.
3. Clean the pan and magnet, then reinstall the pan with a new gasket.
4. Torque the pan bolts to the manufacturer’s specifications.

4. Test Transmission Solenoids

Sub-steps:
1. Disconnect the wiring harness from the transmission solenoids.
2. Use a multimeter to check the resistance of each solenoid against specifications from the service manual.
3. Replace any faulty solenoids with new ones.

5. Reconnect Battery and Test Drive

Sub-steps:
1. Reconnect the battery terminals and ensure they are secure.
2. Start the vehicle and allow it to reach operating temperature.
3. Test drive the vehicle to check for smooth shifting and ensure the issue is resolved.