how to fix the jerking transmission in my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

535 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix jerking transmission issues in the 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission oil pan.

Symptoms

•Jerking or harsh shifting during acceleration
•Delayed engagement when shifting from park to drive/reverse
•Engine RPM fluctuating unexpectedly
•Unusual noises during gear changes
•Potential transmission warning light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or debris.
4
Examine the transmission filter for clogs or damage.
5
Test the transmission control module (TCM) for proper function.
6
Inspect the throttle position sensor for correct operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Funnel
•Transmission fluid pump

Parts Required

•Toyota ATF WS transmission fluid
•Transmission filter
•Gasket for transmission oil pan
•Throttle position sensor (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination or debris.
4
Examine the transmission filter for clogs or damage.
5
Test the transmission control module (TCM) for proper function.
6
Inspect the throttle position sensor for correct operation.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Check and Change Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Using a funnel, add the appropriate type of transmission fluid (Toyota ATF WS) if low.
3. If the fluid is dark or burnt, drain the old fluid by removing the drain plug and allow it to fully drain into a pan.
4. Replace the drain plug and refill with new transmission fluid through the dipstick tube.
5. Start the engine and cycle through the gears to ensure proper fluid circulation.

3. Replace Transmission Filter

Sub-steps:
1. Raise the vehicle using jack stands and remove the undercarriage cover if necessary.
2. Locate the transmission oil pan and remove the bolts securing it.
3. Carefully lower the pan and remove the old filter.
4. Install a new filter, ensuring it is seated properly.
5. Reattach the oil pan with a new gasket and tighten to the manufacturer's torque specifications.

4. Inspect and Replace Throttle Position Sensor (if needed)

Sub-steps:
1. Disconnect the electrical connector from the throttle position sensor.
2. Remove the mounting screws and take out the sensor.
3. Install a new throttle position sensor, ensuring proper alignment.
4. Reconnect the electrical connector securely.