FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the dimming headlights on my Toyota Corolla E170 (2013-2019)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how to fix the dimming headlights on my Toyota Corolla E170 (2013-2019)?

how to fix the dimming headlights on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
541 words

Problem Statement

Learn how to diagnose and fix dimming headlights on your 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to prevent shocks.
  • •Allow the engine and headlights to cool before handling bulbs to avoid burns.

Symptoms

  • •Headlights appear noticeably dimmer than normal
  • •Flickering of headlights during vehicle operation
  • •Dashboard lights dimming when headlights are turned on
  • •Difficulty seeing at night due to reduced light output
  • •Increased frequency of headlight bulb replacements

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Screwdriver set
  • •Electrical cleaner
  • •Wire brush

Parts Required

  • •Replacement headlight bulbs
  • •Fuses (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Ensure the vehicle is parked on a level surface and turn off the engine.
  • Disconnect the negative battery terminal to prevent electrical shock.
2. Inspect and Replace Headlight Bulbs
  • Remove the headlight assembly by unscrewing the retaining clips or bolts.
  • Disconnect the wiring harness from the back of the headlight.
  • Remove the old bulb by turning it counterclockwise and pulling it out.
  • Insert a new bulb (preferably OEM or high-quality replacement) by aligning the pins and turning it clockwise until secured.
  • Reconnect the wiring harness and reinstall the headlight assembly.
3. Check and Replace Fuses
  • Locate the fuse box, usually found under the dashboard or under the hood.
  • Identify the headlight fuse using the diagram on the fuse box cover.
  • Remove the fuse and inspect it for continuity; replace if blown with a fuse of the same amperage.
4. Inspect and Repair Wiring
  • Visually inspect the wiring harness for any signs of fraying, corrosion, or damage.
  • Clean any corroded connectors with electrical cleaner and a brush.
  • Repair or replace damaged wiring as necessary to ensure a proper connection.
5. Test Electrical System
  • Reconnect the negative battery terminal.
  • Start the engine and use a multimeter to check battery voltage and alternator output (should be between 13.7 to 14.7 volts).
  • If the voltage is below this range, consider replacing the alternator or further diagnosing the electrical system.