how to fix P0700 code on Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

508 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components involving the transmission.

Symptoms

•Check engine light illuminated
•Rough shifting or delayed engagement
•Transmission overheating
•Unusual noises from the transmission
•Slipping gears
•Reduced fuel efficiency

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0700 and any related codes.
2
Inspect the transmission fluid level and condition; look for burnt or contaminated fluid.
3
Check the wiring and connectors to the TCM for damage or corrosion.
4
Test the TCM for proper operation using a multimeter.
5
Inspect the vehicle’s battery and charging system to ensure adequate power supply.
6
Review the history of any previous repairs or modifications to the transmission or TCM.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Transmission fluid pump
•Funnel
•Drain pan

Parts Required

•Transmission fluid (Toyota ATF WS)
•Transmission Control Module (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0700 and any related codes.
2
Inspect the transmission fluid level and condition; look for burnt or contaminated fluid.
3
Check the wiring and connectors to the TCM for damage or corrosion.
4
Test the TCM for proper operation using a multimeter.
5
Inspect the vehicle’s battery and charging system to ensure adequate power supply.
6
Review the history of any previous repairs or modifications to the transmission or TCM.

Solution

1. Preparation

Gather tools and parts needed for repairs.
Disconnect the negative terminal of the battery to prevent electrical shorts.
Allow the engine to cool before starting work.

2. Inspect and Replace Transmission Fluid

Tools Required: Transmission fluid pump, funnel, socket set, drain pan.
Remove the transmission fluid drain plug and drain the old fluid into a pan.
Replace the drain plug and refill with new transmission fluid according to the manufacturer's specifications (typically Toyota ATF WS).
Start the engine and cycle through the gears while checking the fluid level.

3. Inspect and Repair Wiring and Connectors

Tools Required: Multimeter, wire strippers, soldering iron (if needed).
Visually inspect the wiring harness connected to the TCM for any signs of wear or damage.
Use a multimeter to check for continuity and proper voltage at the TCM connectors.
Repair or replace any damaged wires or connectors as necessary.

4. Test and Replace TCM (if necessary)

Tools Required: OBD-II scanner, socket set.
If the TCM fails electrical tests, replace it with a new unit.
Reconnect the wiring harness and secure the TCM in place.
Reconnect the negative battery terminal.