how to fix my Toyota Corolla E170 (2013-2019) that won't go into gear

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

554 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in the 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before opening any fluid systems.

Symptoms

•Engine revs but the vehicle does not move when in gear
•Transmission warning light illuminated on the dashboard
•Difficulty shifting gears or grinding noises when attempting to shift
•Fluid leaks underneath the vehicle
•Unresponsive accelerator pedal

Diagnostic Steps

1
Check transmission fluid level and condition using the dipstick.
2
Scan the vehicle’s onboard computer for any error codes using an OBD-II scanner.
3
Inspect the transmission linkage for any signs of damage or disconnection.
4
Examine the clutch pedal operation (if equipped with a manual transmission) for proper engagement.
5
Test the battery voltage and connections to ensure electrical components are functioning optimally.
6
Inspect the transmission fluid for metal shavings or burnt smell indicating internal damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid dipstick
•Socket set
•Torque wrench
•Fluid drain pan
•Brake bleeder kit

Parts Required

•Toyota Genuine ATF WS transmission fluid
•Transmission filter
•Clutch master/slave cylinder

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check transmission fluid level and condition using the dipstick.
2
Scan the vehicle’s onboard computer for any error codes using an OBD-II scanner.
3
Inspect the transmission linkage for any signs of damage or disconnection.
4
Examine the clutch pedal operation (if equipped with a manual transmission) for proper engagement.
5
Test the battery voltage and connections to ensure electrical components are functioning optimally.
6
Inspect the transmission fluid for metal shavings or burnt smell indicating internal damage.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and securely lift it using jack stands.
Disconnect the battery to prevent electrical shorts.

2. Check and Refill Transmission Fluid

Remove the transmission fluid dipstick and wipe it clean.
Insert the dipstick back into the tube and remove it again to check the fluid level.
If low, add the appropriate type of transmission fluid (Toyota Genuine ATF WS) to the fill point.
If the fluid is burnt or contaminated, proceed to the fluid change step.

3. Inspect Transmission Linkage

Locate the transmission linkage and visually inspect for any damaged or disconnected components.
If found, reattach or replace damaged linkage as necessary.
Adjust the linkage to ensure proper engagement if applicable.

4. Replace Clutch Master/Slave Cylinder (if manual)

Locate the clutch master and slave cylinders.
Remove the old components by disconnecting the hydraulic lines and unbolting them from their mounts.
Install the new master/slave cylinder and bleed the clutch system to remove any air.

5. Replace Transmission Fluid (if necessary)

Drain the old transmission fluid into a suitable container.
Replace the transmission filter if applicable.
Reinstall the transmission pan and torque the bolts to the manufacturer’s specification.
Fill the transmission with new Toyota Genuine ATF WS fluid to the proper level.