how to fix my Toyota Corolla E170 (2013-2019) if it won't go into gear

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

622 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting the transmission area.

Symptoms

•Unable to shift the transmission into any gear
•Grinding noise when attempting to shift
•Warning lights illuminated on the dashboard
•Clutch pedal feels stiff or is unresponsive
•Fluid leaks under the vehicle
•Unusual odors (burning smell) from the transmission area

Diagnostic Steps

1
Check the transmission fluid level and condition to ensure it is at the proper level and not contaminated.
2
Inspect the clutch pedal for proper operation and any visible damage or blockage.
3
Scan the vehicle's onboard computer for any error codes related to the transmission or clutch system using an OBD-II scanner.
4
Examine the transmission linkage for any signs of wear or misalignment.
5
Test the clutch master cylinder and slave cylinder for hydraulic leaks and proper function.
6
Inspect the transmission for any physical damage or leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission dipstick
•Funnel
•Clean rags
•Wrench set
•Screwdriver
•Clear tubing
•Catch container
•Socket set
•Torque wrench

Parts Required

•Transmission fluid
•Clutch master cylinder (if faulty)
•Clutch slave cylinder (if faulty)
•Transmission linkage (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level and condition to ensure it is at the proper level and not contaminated.
2
Inspect the clutch pedal for proper operation and any visible damage or blockage.
3
Scan the vehicle's onboard computer for any error codes related to the transmission or clutch system using an OBD-II scanner.
4
Examine the transmission linkage for any signs of wear or misalignment.
5
Test the clutch master cylinder and slave cylinder for hydraulic leaks and proper function.
6
Inspect the transmission for any physical damage or leaks.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery to prevent electrical issues.

2. Check Transmission Fluid

Tools Required: Transmission dipstick, funnel, clean rags
Remove the transmission dipstick and check the fluid level.
If fluid is low, add the appropriate transmission fluid as specified in the owner’s manual.
Inspect fluid for contamination; if it looks burnt or has metal shavings, a transmission service is needed.

3. Inspect Clutch System

Tools Required: Wrench set, screwdriver
Remove the plastic cover under the steering column to access the clutch pedal assembly.
Check for any visible signs of wear or damage to the clutch pedal and linkage.
Ensure the clutch master cylinder is properly filled with fluid; top off if necessary.

4. Bleed Clutch Hydraulics

Tools Required: Clear tubing, catch container, wrench
Locate the bleeder valve on the slave cylinder.
Attach the clear tubing to the bleeder valve and place the other end in a catch container.
Open the bleeder valve and pump the clutch pedal until no air bubbles appear. Close the valve and check fluid levels.

5. Repair or Replace Components

Tools Required: Socket set, torque wrench
If the clutch master/slave cylinder is found to be faulty, remove and replace them following the manufacturer’s specifications.
If the transmission linkage is damaged, replace it with a new part.

6. Reassemble and Test

Reassemble any components removed during the inspection and repair process.
Reconnect the battery.
Start the vehicle and attempt to shift through the gears to ensure proper functionality.