how to fix my Toyota Corolla E170 (2013-2019) if it won't go into gear

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

543 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Toyota Corolla E170 (2013-2019) that prevent it from going into gear. Step-by-step guide included.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely supported on jack stands before working underneath it.

Symptoms

•Gear shifter is unresponsive or feels stuck
•Warning lights illuminated on the dashboard (e.g., check engine light)
•Grinding noise when attempting to shift
•Engine revs without corresponding vehicle movement
•Fluid leaks under the vehicle
•Difficulty in engaging reverse gear

Diagnostic Steps

1
Inspect the transmission fluid level and condition using the dipstick.
2
Check for any error codes using an OBD-II scanner.
3
Examine the clutch pedal for proper travel and any signs of damage or wear.
4
Inspect the gear linkage for any obstructions or disconnections.
5
Test the hydraulic system (if applicable) for leaks or low fluid levels.
6
Verify that the transmission control module (TCM) is functioning properly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Transmission fluid funnel
•Socket set
•Torque wrench
•Wrench set
•Bleeding kit
•OBD-II scanner

Parts Required

•Transmission fluid (specific to vehicle)
•Clutch master cylinder (if needed)
•Clutch slave cylinder (if needed)
•Gear linkage components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the transmission fluid level and condition using the dipstick.
2
Check for any error codes using an OBD-II scanner.
3
Examine the clutch pedal for proper travel and any signs of damage or wear.
4
Inspect the gear linkage for any obstructions or disconnections.
5
Test the hydraulic system (if applicable) for leaks or low fluid levels.
6
Verify that the transmission control module (TCM) is functioning properly.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and securely elevated using jack stands.
Disconnect the battery to prevent electrical issues during repairs.

2. Check and Replace Transmission Fluid

Sub-steps:
- Remove the transmission fluid filler plug.
- Using a funnel, add the appropriate type of transmission fluid (check owner’s manual for specifications).
- Replace the filler plug and ensure it is tightened to manufacturer specifications.
Tools Required: Transmission fluid funnel, socket set, torque wrench.

3. Inspect and Replace Clutch Components (if applicable)

Sub-steps:
- Remove the clutch pedal assembly to access the master and slave cylinders.
- Inspect the clutch master cylinder for leaks and proper operation. Replace if defective.
- Check the slave cylinder for leaks and replace if necessary.
- Bleed the clutch hydraulic system to remove any air.
Tools Required: Wrench set, bleeding kit, replacement clutch components.

4. Adjust or Repair Gear Linkage

Sub-steps:
- Visually inspect the gear linkage for any damage or misalignment.
- If misaligned, adjust the linkage according to service manual specifications.
- Replace any damaged linkage components.
Tools Required: Socket set, pliers.

5. Reconnect Battery and Perform Final Checks

Sub-steps:
- Reconnect the battery terminals securely.
- Start the vehicle and check for proper engagement of gears.
- Test drive the vehicle to confirm the issue is resolved.
Tools Required: None.