how to fix a slipping transmission in my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

3 min read

534 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a slipping transmission in your Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine and transmission to cool down before starting work.
•Always wear safety glasses and gloves when working with automotive fluids.

Symptoms

•Engine revs without corresponding acceleration
•Delayed or harsh shifting between gears
•Transmission warning light illuminated
•Fluid leaks under the vehicle
•Burning smell from the transmission area
•Unusual noises during shifting (grinding or whining)

Diagnostic Steps

1
Check the transmission fluid level and condition using the dipstick.
2
Scan the vehicle's OBD-II system for any transmission-related error codes.
3
Inspect transmission fluid for contamination or burnt smell.
4
Examine the transmission filter for blockages or wear.
5
Inspect the transmission linkage and cables for misalignment or damage.
6
Test the transmission solenoids using a multimeter for proper resistance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fluid catch pan
•Multimeter
•Screwdrivers
•Transmission fluid pump

Parts Required

•Transmission fluid
•Transmission filter
•Gasket for transmission pan
•Transmission solenoids (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level and condition using the dipstick.
2
Scan the vehicle's OBD-II system for any transmission-related error codes.
3
Inspect transmission fluid for contamination or burnt smell.
4
Examine the transmission filter for blockages or wear.
5
Inspect the transmission linkage and cables for misalignment or damage.
6
Test the transmission solenoids using a multimeter for proper resistance.

Solution

1. Preparation

Gather tools and parts required for repair.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Fluid Change

Sub-steps:
1. Remove the transmission pan bolts using a socket set.
2. Carefully lower the transmission pan and drain the old fluid into a pan.
3. Clean the transmission pan thoroughly and replace the filter.
4. Install a new gasket on the transmission pan.
5. Reinstall the transmission pan and torque the bolts to manufacturer specifications (usually 7-10 ft-lbs).

3. Solenoid Replacement

Sub-steps:
1. Locate the transmission solenoids based on the vehicle’s service manual.
2. Disconnect the wiring harness from the solenoids.
3. Remove the solenoid retaining bolts and take out the faulty solenoids.
4. Install new solenoids and secure them with retaining bolts.
5. Reconnect the wiring harness ensuring proper connections.

4. Linkage Adjustment

Sub-steps:
1. Inspect the transmission linkage for any misalignment.
2. Adjust the linkage as necessary to ensure proper shifting.
3. Tighten any loose connections and confirm they are secure.

5. Fluid Refill

Sub-steps:
1. Reconnect the negative battery terminal.
2. Refill the transmission with the appropriate type of fluid (typically Toyota WS).
3. Start the engine and let it warm up while checking for leaks.
4. Check the fluid level again and add fluid as necessary.

Tools Required:

OBD-II scanner
Socket set
Torque wrench
Fluid catch pan
Multimeter
Screwdrivers
Transmission fluid pump

Parts Required:

Transmission fluid
Transmission filter
Gasket for transmission pan
Transmission solenoids (if faulty)

Estimated Repair Time: 3-5 hours

Safety Warnings:

Allow the engine and transmission to cool down before starting work.
Always wear safety glasses and gloves when working with automotive fluids.