how do I reset the oil light on my Toyota Corolla E170 (2013-2019)?

Toyota Corolla E170 (2013-2019)

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

349 words

Problem Statement

Learn how to reset the oil light on your Toyota Corolla E170 (2013-2019) after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake applied before performing the reset.

1
Ensure the vehicle is in the 'ON' position (do not start the engine).
2
Verify that the oil change has been completed and the oil level is correct.
3
Gather the necessary information on the reset procedure specific to the E170 generation.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

2. Navigate to the Reset Procedure

On the steering wheel, locate the "Trip" button.
Press and hold the "Trip" button until the trip meter resets to "0.0".
While holding the "Trip" button, turn the ignition to the "OFF" position.
Continue holding the "Trip" button and turn the ignition back to the "ON" position (do not start the engine).
After a few seconds, the oil change light should flash and then turn off.

3. Final Confirmation