FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the maintenance light on my Toyota Corolla E170 (2013-2019) - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/how do I reset the maintenance light on my Toyota Corolla E170 (2013-2019)

how do I reset the maintenance light on my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
326 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2019 Toyota Corolla E170 with this easy step-by-step guide. No tools required.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is parked and in a safe position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other engine performance issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the necessary tools: None required for this procedure.
  • Ensure the vehicle is parked safely with the engine off.
2. Reset the Maintenance Light

  1. Turn Off the Ignition

    • Ensure that the vehicle is completely off.

  2. Insert the Key

    • Place the key in the ignition without turning it to the "ON" position.

  3. Depress the Gas Pedal

    • Press the gas pedal down slowly three times within five seconds. Make sure to fully release the pedal each time.

  4. Turn the Ignition On

    • Turn the key to the "ON" position without starting the engine. The dashboard lights will illuminate.

  5. Check the Maintenance Light

    • The maintenance light should blink and then turn off. If it remains on, repeat the steps to ensure accuracy.