FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is there smoke coming from my Toyota Corolla E140 (2006-2013) exhaust - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/why is there smoke coming from my Toyota Corolla E140 (2006-2013) exhaust

why is there smoke coming from my Toyota Corolla E140 (2006-2013) exhaust

Toyota Corolla E140 (2006-2013)

Error Codes
4-8 hours
Time
hard
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
586 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix smoke issues from the exhaust of a 2006-2013 Toyota Corolla E140. Step-by-step guide with symptoms and solutions.

Affected Component
Engine
Estimated Time
4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool before opening the cooling system to prevent burns

Symptoms

  • •Blue smoke indicating burning oil
  • •White smoke suggesting coolant leakage
  • •Black smoke showing excessive fuel consumption
  • •Rough idle or engine misfire
  • •Decreased engine performance or power loss
  • •Unusual engine noises (ticking or knocking)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Compression tester
  • •Socket set
  • •Torque wrench
  • •Oil testing kit
  • •Coolant testing kit

Parts Required

  • •Valve cover gasket
  • •Head gasket
  • •Piston rings (if necessary)
  • •Fuel injectors (if necessary)

Additional Information

Affected Component
Engine
Estimated Time
4-8 hours
Difficulty
hard
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, compression tester, socket set, oil and coolant testing kits.
  • Ensure the vehicle is parked on a level surface and the engine is cool before starting.
  • Disconnect the battery before working on electrical systems.
2. Addressing Blue Smoke (Oil Burning)

  1. Replace Valve Cover Gasket:

    • Remove engine cover (if applicable) using a socket set.
    • Unscrew the valve cover bolts and carefully lift the cover.
    • Clean the mating surfaces and install a new gasket.
    • Reinstall the valve cover and torque bolts to manufacturer's specifications (typically around 7-9 ft-lbs).

  2. Replace Piston Rings (if compression test fails):

    • Remove the engine from the vehicle and disassemble.
    • Replace piston rings on affected cylinders.
    • Reassemble the engine and reinstall.
3. Addressing White Smoke (Coolant Leakage)
  1. Replace Head Gasket:
    • Drain coolant and remove necessary components (intake manifold, exhaust manifold) to access the head.
    • Remove the cylinder head, inspect for warping, and replace the head gasket.
    • Reassemble the engine, ensuring proper torque specifications (usually around 60-80 ft-lbs for head bolts).
4. Addressing Black Smoke (Excessive Fuel)
  1. Replace Fuel Injectors:
    • Relieve fuel system pressure and disconnect the battery.
    • Remove the fuel rail and replace faulty injectors with new ones.
    • Reassemble the fuel system, ensuring all connections are secure.