FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E140 (2006-2013) has no power to the fuel pump - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/my Toyota Corolla E140 (2006-2013) has no power to the fuel pump

my Toyota Corolla E140 (2006-2013) has no power to the fuel pump

Toyota Corolla E140 (2006-2013)

Error Codes
1-3 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
581 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel pump power issues in a 2006-2013 Toyota Corolla E140. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the engine to cool before servicing the fuel system.

Symptoms

  • •Engine cranks but does not start
  • •Check engine light may illuminate
  • •Fuel gauge may not function correctly
  • •No sound from the fuel pump when the ignition is turned on
  • •Possible loss of power to other fuel system components

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdrivers
  • •Safety glasses
  • •Jumper wires

Parts Required

  • •Fuel pump relay
  • •Fuel pump fuse
  • •Potentially a new fuel pump

Additional Information

Affected Component
Fuel System
Estimated Time
1-3 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, multimeter, socket set, screwdrivers, and safety glasses.
  • Disconnect the negative battery terminal to ensure safety.
2. Inspect the Fuel Pump Relay
  • Sub-steps:
    1. Locate the fuel pump relay in the fuse box (refer to the owner's manual for exact location).
    2. Remove the relay and visually inspect it for damage or corrosion.
    3. Using a multimeter, test the relay for continuity by checking the terminals.
    4. If defective, replace with a new relay.
3. Check the Fuel Pump Fuse
  • Sub-steps:
    1. Locate the fuse for the fuel pump in the fuse box.
    2. Remove the fuse and inspect it for continuity using a multimeter.
    3. Replace with the same amperage fuse if blown.
4. Test Voltage at the Fuel Pump Connector
  • Sub-steps:
    1. Reconnect the battery and turn the ignition to the ON position without starting the engine.
    2. Using a multimeter, probe the fuel pump connector terminals.
    3. Confirm that there is approximately 12V at the connector. If not, check wiring and connections back to the relay.
5. Inspect Wiring and Harness
  • Sub-steps:
    1. Visually inspect the wiring harness leading to the fuel pump for any signs of wear, corrosion, or damage.
    2. Repair or replace any damaged wiring as necessary.
6. Test the Fuel Pump
  • Sub-steps:
    1. Disconnect the fuel pump from the harness.
    2. Using jumper wires, connect the fuel pump directly to the battery.
    3. Listen for the pump activation sound or check for fuel flow from the pump.
    4. If the pump does not operate, replace the fuel pump.