FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E140 (2006-2013) has a smell of gas what should I check - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/my Toyota Corolla E140 (2006-2013) has a smell of gas what should I check

my Toyota Corolla E140 (2006-2013) has a smell of gas what should I check

Toyota Corolla E140 (2006-2013)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gas smell issues in Toyota Corolla E140 (2006-2013). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on the fuel system.
  • •Work in a well-ventilated area to avoid inhaling fuel vapors.
  • •Allow engine to cool before inspecting or working on fuel components.

Symptoms

  • •Strong odor of gasoline, especially near the engine or fuel tank
  • •Possible fuel stains or wet spots under the vehicle
  • •Engine performance issues (e.g., rough idle, stalling)
  • •Decreased fuel efficiency
  • •Check engine light may be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Torque wrench
  • •Screwdrivers
  • •Fuel line removal tool
  • •OBD-II scanner
  • •Safety goggles
  • •Gloves

Parts Required

  • •Fuel lines
  • •Fuel injectors (if leaking)
  • •O-rings for fuel injectors
  • •Charcoal canister (if damaged)
  • •Fuel tank (if damaged)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed.
  • Ensure the vehicle is parked on a flat surface and engine is turned off.
  • Disconnect the battery to prevent any electrical issues.
2. Inspect and Replace Fuel Lines
  • Sub-steps:
    • Locate the fuel lines running from the fuel tank to the engine.
    • Use a socket set to remove any clamps or securing bolts.
    • Carefully detach the lines and inspect them for cracks or wear.
    • If damaged, replace with new fuel lines of the correct specification.
    • Reattach the lines securely and ensure there are no kinks.
3. Check and Replace Fuel Injectors
  • Sub-steps:
    • Remove the engine cover if applicable.
    • Disconnect the electrical connectors from the fuel injectors.
    • Use a socket to unscrew the injectors from the intake manifold.
    • Inspect the O-rings for wear; replace if necessary.
    • Install new or cleaned injectors, ensuring a tight seal.
    • Reconnect electrical connectors.
4. Inspect and Repair the Fuel Tank
  • Sub-steps:
    • Safely lift the vehicle using jack stands.
    • Inspect the fuel tank for any visible cracks or damage.
    • If any damage is found, drain the fuel tank, remove it, and replace it with a new tank.
    • Reinstall the tank securely and reconnect all hoses and wiring.
5. Test the Evaporative Emission Control System
  • Sub-steps:
    • Inspect the charcoal canister for cracks or leaks.
    • Check the hoses connected to the canister for any signs of wear.
    • Replace any damaged components.
    • Perform a smoke test if necessary to check for leaks in the system.

Tools Required:

  • Socket set
  • Torque wrench
  • Screwdrivers
  • Fuel line removal tool
  • OBD-II scanner
  • Safety goggles and gloves

Parts Required:

  • Fuel lines
  • Fuel injectors (if leaking)
  • O-rings for fuel injectors
  • Charcoal canister (if damaged)
  • Fuel tank (if damaged)

Estimated Repair Time: 2-4 hours

Safety Warnings:

  • Disconnect battery before working on the fuel system.
  • Work in a well-ventilated area to avoid inhaling fuel vapors.
  • Allow engine to cool before inspecting or working on fuel components.