FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E140 (2006-2013) has a fuel smell inside the car what could it be - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/my Toyota Corolla E140 (2006-2013) has a fuel smell inside the car what could it be

my Toyota Corolla E140 (2006-2013) has a fuel smell inside the car what could it be

Toyota Corolla E140 (2006-2013)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
596 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel smell issues in your 2006-2013 Toyota Corolla E140. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on the fuel system
  • •Allow the engine to cool before inspecting the fuel components

Symptoms

  • •Strong odor of gasoline inside the cabin
  • •Presence of fuel stains or wetness under the vehicle
  • •Check engine light illuminated (if related to fuel system)
  • •Engine misfires or rough idling
  • •Decreased fuel efficiency
  • •Increased emissions from the exhaust

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Safety goggles

Parts Required

  • •Fuel lines (if damaged)
  • •Fuel injectors (if leaking)
  • •Fuel pump assembly (if leaking)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, socket set, torque wrench, fuel pressure gauge, and safety goggles.
  • Ensure the vehicle is parked in a well-ventilated area and allow the engine to cool.
2. Inspect Fuel Lines
  • Locate the fuel lines running from the tank to the engine bay.
  • Visually inspect for cracks, pinholes, or wetness around the connections.
  • If a leak is found, replace the damaged section of the fuel line.
  • Use a torque wrench to tighten any loose connections to manufacturer specifications.
3. Check Fuel Injectors
  • Remove the engine cover (if applicable) to access the fuel injectors.
  • Inspect for fuel leaks around the injector seals.
  • Replace any faulty injectors using the following sub-steps:
    • Disconnect the fuel pressure regulator (if necessary).
    • Remove the retaining clips and disconnect the electrical connectors.
    • Replace the old injector with a new one and reassemble in reverse order.
4. Examine Fuel Tank and Pump
  • Safely elevate the vehicle using jack stands.
  • Inspect the fuel tank for any visible cracks or damage.
  • Check the fuel pump for leaks at the seam or connections.
  • If leaks are found, replace the fuel pump assembly, following these sub-steps:
    • Disconnect the battery.
    • Relieve fuel system pressure using the fuel pressure gauge.
    • Unplug electrical connectors and remove the fuel lines from the pump.
    • Remove the fuel tank to access the pump and replace it.
5. Final Assembly
  • Reassemble any components removed during inspection.
  • Ensure all connections are secure and tight.
  • Reconnect the battery and clear any error codes using the OBD-II scanner.