FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on Toyota Corolla E140 (2006-2013)

how to reset the maintenance light on Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
379 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140 with this simple step-by-step guide. No tools required.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and cannot roll during the process.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No changes in vehicle performance or drivability
  • •Reminder for maintenance services due

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this task.
  • Ensure the vehicle is parked safely and the ignition is off.
2. Reset Maintenance Light
  1. Access the Trip Meter Reset Button: Locate the trip meter reset button on the instrument panel.
  2. Turn Off Ignition: Confirm that the ignition is turned off completely.
  3. Press and Hold Reset Button: Press and hold the trip meter reset button.
  4. Turn Ignition to ON: While still holding the reset button, turn the ignition key to the "ON" position (do not start the engine).
  5. Wait for the Light to Reset: Keep holding the reset button until the maintenance light blinks and turns off (approximately 10 seconds).
  6. Release the Button: Once the light is off, release the trip meter reset button.
  7. Turn Ignition Off: Turn the ignition back to the "OFF" position.