FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)?

how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)?

Toyota Corolla E140 (2006-2013)

Error Codes
Less than 15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
404 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140. Step-by-step guide for a quick and easy reset.

Affected Component
Electrical
Estimated Time
Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a flat surface before performing this procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notifications for scheduled maintenance
  • •No engine performance issues related to the light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
Less than 15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure that the vehicle is parked in a safe location and the engine is off.
  • Gather necessary tools: none required for this procedure.
2. Resetting the Maintenance Light
  1. Turn Off the Ignition: Ensure the ignition is off by turning the key to the "OFF" position.
  2. Press and Hold the Reset Button: Locate the trip meter reset button on the dashboard and press it while holding it down.
  3. Turn the Ignition On: With the reset button still pressed, turn the ignition key to the "ON" position without starting the engine. The dashboard lights will illuminate.
  4. Watch the Maintenance Light: Hold the reset button until the maintenance light begins to blink and then turns off. This usually takes about 10 seconds.
  5. Release the Button: Once the light is off, you can release the trip meter reset button.
  6. Turn Off the Ignition: Turn the ignition back to the "OFF" position.
  7. Start the Engine: Start the engine to verify that the maintenance light is no longer illuminated.