FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
397 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140 with this easy step-by-step guide. No special tools required.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the ignition is off before beginning the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No engine performance issues indicated
  • •No error codes present in the OBD-II system
  • •Service reminder not cleared after maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools required

Parts Required

  • •No parts required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • No special tools are required for this procedure.
  • Ensure the vehicle is parked safely with the ignition off.
2. Reset Maintenance Light
  1. Turn Off the Ignition: Make sure your vehicle is completely off.
  2. Press and Hold Odometer Reset: Locate the odometer reset button (typically on the dashboard) and press and hold it down.
  3. Turn Ignition On: While holding the odometer button, turn the ignition key to the "ON" position without starting the engine. The dashboard lights should illuminate.
  4. Wait for Light to Reset: Keep holding the odometer button until the maintenance light blinks and eventually turns off (this may take about 5-10 seconds).
  5. Release the Odometer Button: Once the light is off, release the odometer button.
  6. Verify Reset: Turn the ignition off and then back on to ensure the maintenance light does not illuminate again.